Industrial Touch-Safe Heater Use in Enclosures 50W to 150W CS060

Feature:Low surface temperatureQuick mounting due to clip fixingDouble insulated (plastic)Wide voltage rangeSmall size Introduct Feature: Low surface temperature Quick mounting due to clip fixing Double insulated (plastic) Wide voltage range Small size  Introduction: Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060. This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF 060). Both versions are designed for permanent operation.  Product details:
Operating voltage 120-240V AC* (min. 110V, max. 265V)
Heating capacity see table
Heating element PTC resistor - temperature limiting
Surface temperature <80°C(176°F), except upper protective grille
Connection 4-pole terminal 2.5mm2, torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 50022
Fitting position vertical
Operating / Storage temperature -20 to +70°C (-4 to +158°F) / -45 to +70°C (-49 to +158°F)
Protection type / Protection class IP30 / 2(double insulated)
Note other voltages on request
Art. No. Heating capacity Inrush current  max. Air outlet   temperature Dimension (mm)  Weight (approx.)
06000.0-00 50W 2.5A +86°C 110*60*90  0.3kgs
06010.0-00 100W 4.5A +120°C 110*60*90  0.3kgs
06020.0-00 1500W 8A +145°C 150*60*90    0.3kgs

Industrial Touch-Safe Heater Use in Enclosures 50W to 150W CS060 Related Video: